Gyroscope

M-XDR series is a Z-axis MEMS angular rate sensor (gyroscope) with a maximum range of up to ±2000°/s, and its digital output interface complies with the SPI slave protocol. The angular rate data is in 24-bit two's complement format. M-XDR series is suitable for high-performance industrial applications. It uses an advanced differential MEMS design, which can eliminate the effects of linear acceleration and can operate in harsh environments with extreme shock and vibration. The specially designed package can be soldered through the bottom or the front to simplify the system's structural design. When mounted on the bottom, the sensitive axis is perpendicular to the main circuit board. When mounted on the front, the sensitive axis is parallel to the main circuit board.

The MHZ-XXXX silicon-based MEMS gyroscope adopts a compact 48-pin ceramic package and advanced MEMS sensing technology. This ultra high precision single-axis gyroscope features high accuracy, excellent stability, low noise performance, wide temperature adaptability, and reliable digital output, providing precise angular velocity measurement for advanced inertial applications.

The MGZ-XXXX silicon-based MEMS gyroscope adopts a compact 48-pin ceramic package and advanced MEMS sensing technology. This high precision single-axis gyroscope features high accuracy, excellent stability, low noise performance, wide temperature adaptability, and reliable digital output, providing accurate angular velocity measurement for demanding inertial applications.

The M3G-230 MEMS three-axis gyroscope assembly is a highly reliable and cost-effective 3-axis MEMS gyroscope, suitable for navigation, control, and other fields of low- and medium-orbit satellites. The M3G-230 series three-axis gyroscope assembly integrates high-performance MEMS gyroscopes within an independent structure. The gyroscopes used in the system represent the leading level of domestically produced MEMS technology inertial devices. All electronic components within the system are 100% domestically produced. The three-axis MEMS gyroscopes sense the angular motion of the carrier, and the system internally compensates for zero position, scale factor, and non-orthogonal errors across all temperature parameters, maintaining high measurement accuracy over a long period of time.

The M3G-220 MEMS three-axis gyroscope assembly is a highly reliable and cost-effective 3-axis MEMS gyroscope assembly, specifically designed for navigation and control applications in low- and medium-orbit satellites. The M3G-220 series of three-axis gyroscope assemblies integrates high-performance MEMS gyroscopes within an independent structure. The gyroscopes used in the system represent the leading level of domestically produced MEMS technology inertial devices. All electronic components within the system are 100% domestically produced. The three-axis MEMS gyroscopes sense the angular motion of the carrier, and the system internally compensates for zero position, scale factor, and non-orthogonal errors across all temperature parameters, maintaining high measurement accuracy over extended periods.

The M3G-210 MEMS three-axis gyroscope is a highly reliable and cost-effective 3-axis MEMS gyroscope assembly, widely applicable in navigation, control, and other fields represented by stability control. The M3G-210 series three-axis gyroscope assembly integrates high-performance MEMS gyroscopes within an independent structure. The gyroscopes selected for the system represent the advanced level of domestic MEMS technology inertial devices. All electronic components within the system are 100% domestically produced. The system internally compensates for the zero bias, scale factor, and non-orthogonal error of the three-axis MEMS gyroscopes across all temperature parameters, maintaining high measurement accuracy over a long period of time.

The M-QMG07-XXX gyroscope is a single-axis capacitive MEMS gyroscope, primarily composed of a fully silicon MEMS sensing structure and a low-power signal processing ASIC. The M-QMG07-XXX gyroscope is powered by a single power supply, with typical low power consumption. The output digital signal is in SPI mode. Product packaging. The product is packaged in a standard LCC20 ceramic package with a total of 20 pins. The product weight is 0.60±0.02 grams.

MG-404 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

MG-403 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

MG-401 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

MG-503 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

MG-501 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.