Wholesale Inclinometer & Tilt Switch, Inclinometer & Tilt Switch Manufacturers

In applications where tilt and inclination must be monitored reliably—such as construction machinery, safety systems, structural monitoring, and remote equipment—our advanced Tilt Sensing Solutions deliver precise and dependable angle detection across diverse environments and installation requirements.

Inclinometer (Tilt Sensor)
High-precision angle measurement designed for continuous monitoring and control applications.

Tilt Switch
Simple and reliable threshold-based tilt detection, ideal for safety alerts and equipment protection.

Wireless Inclinometer
Cable-free tilt monitoring solution for remote or hard-to-access installations, enabling flexible deployment.

Dynamic Inclinometer
Engineered for motion environments, providing stable and accurate tilt data even under vibration and dynamic conditions.

A total of4pages

High Performance T700-D Digital 3-Axis Tilt Switch Fast Response 0.01s Long Life ≥55000h for Robotics, Wind Turbine, Marine

T700-D

T700-D is a digital output (X, Y, Z) three-axis inclination sensor launched by Micro-Magic Inc Hi-Tech Company for the field of industrial field control. It has a built-in high-precision 16bit A/D converter, and through an n-order filtering algorithm, it finally outputs X, Y, Z-axis inclination angle value. The output interfaces RS232, RS485, RS422, TTL, Modbus and CAN bus are optional. The product can correct the sensor temperature drift based on the temperature changes monitored by the built-in temperature sensor to ensure the repeatability of the product in low and high temperature environments. Output corresponding frequency 100HZ.
View More
T700-C Digital Tri-Axis Tilt Sensor Single Board Accuracy 0.02° Resolution 0.005° RS232/RS485/RS422/Ttl/Modbus/Can Output

T700-C

The T700-C is a digital output (X, Y, Z) three-axis inclination sensor with a built-in high-precision 16bit A/D converter, and through an n-order filtering algorithm, the final output X, Y, Z inclination values. Output interface has RS232, RS485, RS422, TTL, Modbus, and Canopen optional. The product can correct the sensor temperature drift based on the temperature changes monitored by the built-in temperature sensor to ensure the repeatability of the product in low and high temperature environments. Output corresponding frequency 100HZ.
View More
T700-B Digital Output Tri-Axis Inclination Sensor Mems 3-Axis Tilt Inclinometer Board ± 90° RS232 RS485 RS422 Ttl Can Modbus, Accuracy 0.01°

T700-B

The T700-B is a digital output (X, Y, Z) three-axis inclination sensor with a built-in high-precision 16bit A/D converter, and through an n-order filtering algorithm, the final output X, Y, Z inclination values. Output interface has RS232, RS485, RS422, TTL, Modbus, and Canopen optional. The product can correct the sensor temperature drift based on the temperature changes monitored by the built-in temperature sensor to ensure the repeatability of the product in low and high temperature environments. Output corresponding frequency 100HZ. The product is good for dangerous building monitoring.
View More
T70-G Digital Output Dual-Axis Tilt Sensor Real-Time Angle Monitoring for Power, Solar, Mining, Marine

T70-G

The T70-G series is a new generation of digital small volume MEMS tilt sensors launched by Micro-Magic Inc Hi-Tech Company. It is equipped with a dual channel Earth gravity tilt unit, which measures dynamic gravity acceleration and converts it into tilt angle changes. Thus, it is possible to measure the tilt and pitch angles of the sensor output relative to the horizontal plane. The output methods RS232, RS485, RS422, Modbus, and TTL level interface standards are optional. Due to the built-in MCU control system, the sensor output linearity is corrected twice, compensating for the accuracy decrease caused by insufficient correction in analog models.
View More
Digital Dual Axis Inclination Sensor Mems Tilt Angle Sensor RS232 RS485 RS422 Modbus Output

T7-A

The T7-A series is a new generation of digital small-volume Micro-Magic Inc inclination sensors launched by MXMW Hi-Tech Company. It has a built-in dual-channel earth gravity inclination unit that measures dynamic gravity acceleration and converts it into inclination angle changes. This allows measurement of the roll and pitch angles of the sensor output relative to the horizontal plane. It has output mode as RS232, RS485, RS422, Modbus, TTL level interface standard optional. Due to the built-in MCU control system, the linearity of the sensor output is corrected twice, which makes up for the decrease in accuracy caused by insufficient correction of the analog type.
View More

Prex

1 2 3 4

Inclinometer & Tilt Switch

Chips&Compoments

Test Machine

Integrated Products