M3G-300-CA 3 Axis MEMS Gyroscope Angle Sensor CAN Bus IP67 for Industrial Motion Control

The M3G-300-CA is presented as a three-axis gyro angle sensor intended to measure the deflection angle of moving objects. The source describes a built-in digital signal processor using adaptive filtering, resonance suppression and temperature compensation to reduce zero-offset drift, angle-rate random walk, vibration-related interference and temperature drift.

The sensor measures rotational rates up to 300°/s. A high-speed microprocessor integrates the gyroscope’s real-time angular-rate signal to calculate angular displacement on up to three axes (X, Y and Z) simultaneously.

The industrial-grade MEMS design is described as waterproof, shock-resistant, resistant to electromagnetic interference and low-power. According to the source, magnetic-field interference does not affect yaw-angle measurement; with a selected zero-offset angle, it can serve some electronic-compass functions in magnetic environments.

  • Part No, :

    M3G-300
  • Order(MOQ) :

    1
$347.00
  • Product Description

Product Series and Parameters

Parameter Condition M3G-300-CA-A M3G-300-CA-B M3G-300-CA-C unit
Measure axially   X/XY axis direction Y/XZ axis direction Z/YZ axis direction  
Acquisition bandwidth   >1000 >1000 >1000 Hz
Resolution   ±0.1 ±0.1 ±0.1 °/S
Nonlinear   0.1% of FS 0.1% of FS 0.1% of FS  
Dynamic precision   0.5 0.5 0.5 °
Static precision   0.1 0.1 0.1 °
Roll/Pitch   X,Y axis: ±90° (can be customized)      
    Z axis: Full 360° rotation      
Temperature compensation -45~85° Full temperature range Full temperature range Full temperature range  
Temperature drift Room temperature <±0.2 <±0.2 <±0.2 °/sec
Power-on startup time   0.5 0.5 0.5 s
Baud rate 100K–500K bps (configurable)
Output signal CAN
Mean Time Between Failures ≥45,000 hours/cycles
Impact resistance 20000g,2ms,1/2sine
Anti-vibration 10grms、10~1000Hz
Waterproof level IP67
Cable Comes standard with a 1.5-meter shielded cable (5 x 0.2 mm²) that is wear-resistant, oil-resistant, and suitable for a wide temperature range.
Weight 180g (excluding packaging box)
Connector 6-pin aviation plug
Capacitive load 1000

Production process


Product dimension

MEMS Inertial Sensor


Application Scenarios

MEMS Gyroscope application

The M3G-300 is a high-reliability, cost-effective three-axis MEMS gyroscope assembly that outputs 3D angular velocity, temperature, and fault-diagnosis data via RS-422, designed for high-precision attitude/rotation sensing in low- and medium-orbit satellite navigation and stabilization control.

Contact Us
quartz accelerometer for Aerospace
Aerospace
quartz accelerometer for Aviation
Aviation
quartz accelerometer for Weapon
Weapon

FAQ

Q1: What does the M3G-300-CA measure?
A: The M3G-300-CA is a MEMS gyroscope-based angle sensor that measures angular displacement by integrating rotational rate signals. It supports angle measurement on up to three axes.

Q2: What is the maximum rotational rate?
A: The maximum supported rotational rate is 300°/s. Exceeding this limit may increase measurement errors.

Q3: What are the angle measurement ranges?
A: The standard X- and Y-axis angle ranges are ±90°. The Z-axis supports ±180°, with a 360° output option available. Please specify your required configuration when ordering.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products

M3G-220 High Precision MEMS 3-Axis Gyroscope

The M3G-220 MEMS three-axis gyroscope assembly is a highly reliable and cost-effective 3-axis MEMS gyroscope assembly, specifically designed for navigation and control applications in low- and medium-orbit satellites. The M3G-220 series of three-axis gyroscope assemblies integrates high-performance MEMS gyroscopes within an independent structure. The gyroscopes used in the system represent the leading level of domestically produced MEMS technology inertial devices. All electronic components within the system are 100% domestically produced. The three-axis MEMS gyroscopes sense the angular motion of the carrier, and the system internally compensates for zero position, scale factor, and non-orthogonal errors across all temperature parameters, maintaining high measurement accuracy over extended periods. A standout feature of the M3G-210 and M3G-220 is their direct compatibility with the Sensonor STIM200/202 series. Both models adopt identical mounting-hole layouts and 15-pin Micro-D connector pin assignments, allowing system integrators to complete upgrades or replacements without mechanical modification to the host platform. At the software level, the M3G-2XX series supports multiple communication protocols, including STIMGYRO-90, enabling seamless interfacing with existing inertial measurement systems.

View More
M3G-210 High Precision MEMS 3-Axis Gyroscope(Compatible with STIM210)

The M3G-210 MEMS three-axis gyroscope is a highly reliable and cost-effective 3-axis MEMS gyroscope assembly, widely applicable in navigation, control, and other fields represented by stability control. The M3G-210 series three-axis gyroscope assembly integrates high-performance MEMS gyroscopes within an independent structure. The gyroscopes selected for the system represent the advanced level of domestic MEMS technology inertial devices. All electronic components within the system are 100% domestically produced. The system internally compensates for the zero bias, scale factor, and non-orthogonal error of the three-axis MEMS gyroscopes across all temperature parameters, maintaining high measurement accuracy over a long period of time.

View More
M-QMG07 High Precision MEMS Single-Axis Gyroscope

The M-QMG07-XXX gyroscope is a single-axis capacitive MEMS gyroscope, primarily composed of a fully silicon MEMS sensing structure and a low-power signal processing ASIC. The M-QMG07-XXX gyroscope is powered by a single power supply, with typical low power consumption. The output digital signal is in SPI mode. Product packaging. The product is packaged in a standard LCC20 ceramic package with a total of 20 pins. The product weight is 0.60±0.02 grams.

View More
MG-404 Precision MEMS Rate Gyro

MG-404 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

View More
MG-403 Single Axis Gyroscope Module

MG-403 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

View More
High Precision MEMS Single-Axis Gyroscope MG-401

MG-401 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

View More
MG-503 Series Digital Single Axis MEMS Gyro

MG-503 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

View More
MG-501 High Precision MEMS Single-Axis Gyroscope Sensor

MG-501 single axis gyroscope is a high-precision MEMS single axis gyroscope product launched by Micro-Magic Inc company. Adopting small volume ceramic packaging, it has the characteristics of high precision, wide range, resistance to large impact, wide temperature range, and fully digital output. Mainly used in inertial navigation, integrated navigation, attitude reference system (AHRS), platform stabilization system, unmanned aerial vehicle flight control, etc.

View More

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

whatsApp

Contact

Shopping Cart
item.name
[[ item.product_name ]]
[[ line.text ]]
[[ item.delivery_text ]]
* [[ item.qty ]]
Your Cart Is Empty!