Inertial Sensors Maker

A total of30pages

G-F2X70-A Dual-Axis Medium-Precision Fiber Optic Gyroscope Industrial-Grade Stability Mems Fiber Optic Gyroscope Factory Direct Supply

G-F2X70-A

As a new type of all-solid state gyro, fiber optic gyroscope has the advantages of fast start, wide measurement range and high reliability. G-F2X70 dual-axial medium precision fiber optic gyroscope can be applied to the on-board stability platform, guide head, crane bin and other fields. The specification is only applicable to G-F2X70 type products, including performance indicators, technical conditions, external dimensions and installation and use. Among them, the technical conditions include the environmental range, electrical performance and physical characteristics of the product.
View More
A5700 High Precision MEMS AHRS 6 Axis Attitude Heading Reference System Inertial Sensor

A5500

The A5700 high-precision MEMS heading and attitude reference system (AHRS) is a highly reliable and cost-effective six-axis MEMS inertial system for heading and attitude measurement, widely applicable in navigation, control, and measurement applications such as satellites, vehicles, ships, and drones. The A5700 series integration a high-performance MEMS gyroscope and MEMS accelerometer within a single integrated structure, with comprehensive compensation for temperature-dependent parameter zero points, scale factors, non-orthogonal errors, and acceleration-related terms, ensuring sustained high measurement accuracy. The system outputs attitude information through navigation calculations based on the angular motion of the three-axis MEMS gyroscope sensor and the linear acceleration measured by the three-axis MEMS accelerometer sensor.
View More
T70-FC High Precision Dual Axis Tilt Switch 4-Phase 4-Way Relay Output Inclinometer Accuracy 0.01°, Resolution 0.002°, IP67 Waterproof

T70-FC

T70-FA is a high-precision 0.01°, small size, low power consumption, high consistency and stability, dual axis 4-phase and 4-way tilt switch launched by Micro-Magic Inc Hi-Tech Company. The working temperature reaches industrial grade -40 ℃ -85 ℃, and the alarm threshold of the switch action point is calibrated at the factory. It is equipped with computer debugging software, and the switch action point and trigger delay time can be set by the user. The product is designed with precision, compensating for temperature and linearity again, integrating comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc.

$164.00 $164.00

View More
T70-FB High Precision Dual Axis Tilt Switch 4-Phase 4-Way Relay Output Inclinometer Accuracy 0.01°, Resolution 0.002°, IP67 Waterproof

T70-FB

T70-FA is a high-precision 0.01°, small size, low power consumption, high consistency and stability, dual axis 4-phase and 4-way tilt switch launched by Micro-Magic Inc Hi-Tech Company. The working temperature reaches industrial grade -40 ℃ -85 ℃, and the alarm threshold of the switch action point is calibrated at the factory. It is equipped with computer debugging software, and the switch action point and trigger delay time can be set by the user. The product is designed with precision, compensating for temperature and linearity again, integrating comprehensive protection functions such as short circuit, instantaneous high voltage, polarity, surge, etc.

$164.00 $164.00

View More
High Performance T70-D-AV Mems Tilt Switch Built-in Dual Relays for Solenoid Valve / Alarm Systems

T70-D-AV

T70-D is a high-performance relay output single-axis dual-channel digital tilt switch launched by Micro-Magic Inc Hi-Tech Company. The product has a measurement range of 0~±180° and two built-in relay output circuits. When the inclination angle value is greater than the preset alarm threshold, a non-inductive contact relay signal (driving current 1A) will be output, and the solenoid valve will be opened to perform corresponding hydraulic leg leveling. The alarm threshold is calibrated at the factory, and users can also set the alarm angle threshold by themselves.

$97.00 $97.00

View More
TD9-CA High Precision 3 Axis MEMS Inclinometer Sensor Dynamic Static Tilt Sensor

TD9-CA

The TD9 is a digital three-axis X, Y, and Z tilt angle sensor (referred to as the "tilt angle sensor") developed domestically by Micro-Magic Inc for high-precision tilt angle measurement modules. It integrates industrial standard RTU Modbus and 0x68 hexadecimal protocols; The accompanying computer analysis software can display and record measurement data in real-time for analysis. Domestic components account for over 85%, with internal core components including MCU microcontrollers, high-precision 16 bit A/D modules, temperature sensors, signal processors, power circuits, output circuits, etc. To manufacture domestically produced equipment and overcome barriers to independent research and development technology.

$143.00 $143.00

View More
TD9-AV High Precision 3 Axis MEMS Inclinometer Sensor Dynamic Static Tilt Sensor

TD9-AV

The TD9 is a digital three-axis X, Y, and Z tilt angle sensor (referred to as the "tilt angle sensor") developed domestically by Micro-Magic Inc for high-precision tilt angle measurement modules. It integrates industrial standard RTU Modbus and 0x68 hexadecimal protocols; The accompanying computer analysis software can display and record measurement data in real-time for analysis. Domestic components account for over 85%, with internal core components including MCU microcontrollers, high-precision 16 bit A/D modules, temperature sensors, signal processors, power circuits, output circuits, etc. To manufacture domestically produced equipment and overcome barriers to independent research and development technology.

$143.00 $143.00

View More
TD7-AC High Performance Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

TD7

The TD7 is a new generation high-performance tilt sensor launched by Micro-Magic Inc, which can maintain high precision in complex movements with a small size. It has a dynamic measurement accuracy of 0.3°, a stable accuracy of 0.05°, and a temperature drift of 0.01°/℃. The output interfaces RS232, RS485, RS422, Modbus, TTL, and CAN buses are optional, making it easy to integrate into user control systems.

$284.00 $284.00

View More
TD7-CA High Performance Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

TD7-CA

The TD7 is a new generation high-performance tilt sensor launched by Micro-Magic Inc, which can maintain high precision in complex movements with a small size. It has a dynamic measurement accuracy of 0.3°, a stable accuracy of 0.05°, and a temperature drift of 0.01°/℃. The output interfaces RS232, RS485, RS422, Modbus, TTL, and CAN buses are optional, making it easy to integrate into user control systems.

$284.00 $284.00

View More
TD7-AV High Performance Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

TD7-AV

The TD7 is a new generation high-performance tilt sensor launched by Micro-Magic Inc, which can maintain high precision in complex movements with a small size. It has a dynamic measurement accuracy of 0.3°, a stable accuracy of 0.05°, and a temperature drift of 0.01°/℃. The output interfaces RS232, RS485, RS422, Modbus, TTL, and CAN buses are optional, making it easy to integrate into user control systems.

$284.00 $284.00

View More
TD6-AC Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

TD6-AC

The TD6 is a new generation MEMS dynamic tilt sensor that can measure tilt data of moving carriers or strong vibration states. Dynamic measurement accuracy of 0.5°, static accuracy of 0.06°, small size, low power consumption, high consistency and stability, output RS232, RS485, RS422, Modbus, TTL, CAN optional; Built in MCU control system, vertical gyroscope and accelerometer, integrated attitude solver, using optimal digital filtering algorithm to reduce noise, combined with N-order Kalman filtering algorithm, eliminating error sources and improving measurement accuracy through various compensations such as nonlinear compensation, orthogonal compensation, temperature drift, etc.

$192.00 $192.00

View More
TD6-CA Dynamic MEMS Inclinometer Sensor Dual Axis Tilt Sensor

TD6-CA

The TD6 is a new generation MEMS dynamic tilt sensor that can measure tilt data of moving carriers or strong vibration states. Dynamic measurement accuracy of 0.5°, static accuracy of 0.06°, small size, low power consumption, high consistency and stability, output RS232, RS485, RS422, Modbus, TTL, CAN optional; Built in MCU control system, vertical gyroscope and accelerometer, integrated attitude solver, using optimal digital filtering algorithm to reduce noise, combined with N-order Kalman filtering algorithm, eliminating error sources and improving measurement accuracy through various compensations such as nonlinear compensation, orthogonal compensation, temperature drift, etc.

$192.00 $192.00

View More

Prex

1 2 3 4 5 6 7 8 9 10 29 30

Products

Chips&Compoments

Test Machine

Integrated Products