Wireless MEMS Inclinometer Sensor Modbus Bluetooth Zigbee Dual Axis Tilt Sensor
The T7000-M Modbus protocol is a wireless tilt sensor independently developed by Micro-Magic Inc, which features ultra-low power consumption, small size, and high performance. It is designed for
Industry applications where users have no power supply conditions or real-time dynamic measurement of object posture angles. Powered by lithium batteries and based on IoT technology Bluetooth, Zigbee (optional) wireless transmission technology. All internal circuits are optimized with industrial-grade MCUs, triple-protection PCB boards, imported cables, wide-temperature metal casings, and other measures to enhance the product's industrial-grade performance, ensuring long-term stability, minimal zero drift, and automatic entry into low-power sleep mode, thereby reducing dependency on usage environments.
Part No, :
T7000-MOrder(MOQ) :
1Product Series and Parameters
| Parameter | Condition | T7000-M | Unit | |||
| Measuring range | ±90 | ° | ||||
| Measuring axis | X, Y axis | |||||
| Zero temperature drift | -40~85°C | ±0.002 | °/°C | |||
| Sensitivity Temperature Coefficient | -40~85°C | ≤150 | ppm/°C | |||
| Frequency response | DC response | 100 | Hz | |||
| Resolution | 0.002 | ° | ||||
| Accuracy | -40~85°C | 0.01 | ° | |||
| Long term stability | -40~85°C | <0.015 | ° | |||
| Power-on start time | 0.2 | 0.2 | 0.2 | 0.2 | s | |
| Response time | 0.05 | 0.05 | 0.05 | 0.05 | s | |
| Wireless frequency | 2460MHZ (default), 2405~2480 adjustable | |||||
| Transmission distance | 1.6KM | |||||
| Built-in battery capacity | 6000mAh | |||||
| Average working hours | ≥55000 hours/time | |||||
| Impact resistance | 20000g, 0.5ms, 3 times /axis | |||||
| Anti-vibration | 10grms、10~1000Hz | |||||
| Insulation resistance | ≥100MΩ | |||||
| Waterproof level | IP67 | |||||
| Weight | 460g (excluding packaging box) | |||||
Production process
More similar products

Product dimension

Product size: L94*W74*H64 MM
The default is to install horizontally upward: when installing, keep the sensor installation surface parallel to the measured target surface; please refer to the rotation diagram for installation methods. If other installation methods are required, please refer to the schematic diagram of "Product Installation Method" and make a note when ordering.
Application Scenarios



FAQ
Xml Privacy Policy Blog Sitemap
copyright @ Micro-Magic Inc All Rights Reserved.
Network Supported